Century Plywood Price in Hyderabad Today
- Price today
- ₹1,168–₹1,997/sheet
- Options compared
- 3
- Typical time to quotes
- 10 min
Free to compare. Ordering in bulk? Dealers usually quote lower per sheet on bigger orders.
Lowest in the city. Every brand's verified suppliers quote, and you see the lowest.
Delivered within 24 hours. All construction materials in Hyderabad
As of 18 November 2026, century plywood in Hyderabad costs ₹1,168 to ₹1,997/sheet (an 8 × 4 ft sheet), across 3 options, delivered within 24 hours. Prices are indicative catalogue rates and move weekly. On Clyft, verified suppliers across the city quote against your exact requirement, so you pay the lowest quote rather than a list price.
Today's Century Plywood prices
Plywood is quoted per sheet or per square foot. The standard sheet is 8 × 4 ft, which is 32 sq ft, so a ₹1,600 sheet is ₹50 a square foot. “From” prices are for larger loads; a smaller order is quoted a little higher per unit.
| Product | Price from |
|---|---|
| Century Sainik MR PlywoodLowest | from₹1,168/sheet |
| Century Sainik 710 Plywood | from₹1,416/sheet |
| Century Club Prime Plywood | from₹1,997/sheet |
How this price is worked out
Every figure on this page is the “from” rate a verified Hyderabad supplier has listed on Clyft for that exact product, checked on 18 November 2026, not an average of adverts or a national index. Rates step with quantity, as they do at any dealer: the “from” rate is what a larger load is quoted at, and a smaller order comes in a little higher per unit. When you select the brand and quantity in the app, suppliers across the city quote for your exact order within about ten minutes, and you see the lowest. Prices include delivery to your site within Hyderabad; unloading and GST are shown separately on the quote.
How Century compares on price in Hyderabad
The rest of the plywood we carry, so you can see where Century sits rather than taking a number on trust.
| Alternative | Price from |
|---|---|
| Greenply plywoodfrom Greenply Ecotec MR Ply | from₹1,368 |
Plywood grades, and which one you actually need
The grade is about glue, not timber. MR is urea-formaldehyde and fails when wet; BWP/710 is phenolic and survives a boiling water test. Hyderabad kitchens get wet from below more often than people expect, so 710 for the kitchen carcass and BWR or MR elsewhere is the usual sensible split.
| Grade | Standard | Use it for |
|---|---|---|
| MR (moisture resistant) | IS 303 | Dry interiors only — wardrobes, bedroom furniture. |
| BWR (boiling water resistant) | IS 303 | Kitchens and areas with occasional water. |
| BWP / 710 | IS 710 | Kitchen, bathroom, anywhere permanently damp. The marine grade. |
| Thickness 6–19 mm | — | 6 mm backing, 12 mm shutters, 19 mm shelves and load-bearing carcass. |
What moves the plywood price in Hyderabad
- Timber and face veneer
- Core species and the quality of the visible face veneer are the largest input, and gurjan-faced sheets carry a clear premium.
- Phenolic resin
- The glue that makes a 710 sheet a 710 sheet is petrochemical-linked and a real part of the gap over MR.
- Core construction
- Full hardwood core against a mixed or softwood core changes both price and how the sheet holds a screw. It is also the easiest thing for a seller to be vague about.
- Brand and warranty
- Much of the premium on a branded sheet is the warranty and the consistency behind it rather than a measurable difference in one sheet.
How much you need
A straight 10 ft kitchen in 710-grade ply takes roughly 12–15 sheets for carcass and shutters. A standard wardrobe is about 6–8. Add 10% for cutting waste — more if the design has many small components.
What to check before you sign for it
- The ISI mark with the correct standard — IS 710 for BWP, IS 303 for MR and BWR. The number is stamped, not just claimed.
- Look at the cut edge: core veneers should be even, tight and free of gaps. Visible voids mean weak screw holding.
- The sheet should lie flat. A warped sheet never recovers and will pull a shutter out of line.
- Weight. A full hardwood core sheet is noticeably heavier than a softwood one of the same thickness.
- Actual thickness with a vernier. A sheet sold as 19 mm that measures 17.5 is a 8% shortfall you pay for.
Questions people ask
What is the price of Century Plywood in Hyderabad today?
As of 18 November 2026, Century Plywood in Hyderabad ranges from ₹1,168 to ₹1,997 depending on brand and quantity. These are indicative catalogue prices. On Clyft, suppliers across the city quote against your exact requirement, so the price you pay is the lowest quote.
Why does the price change?
Construction material prices move weekly with fuel, freight and demand, and they are never published openly, which is why two dealers quote differently for the same bag on the same day. Clyft makes that competition visible instead of leaving you to phone around.
Is the price the same for any quantity?
No. Like any dealer, suppliers price by quantity: the “from” rate on this page is what a larger load is quoted at, and a smaller order comes in a little higher per unit. Select the brand and your quantity in the Clyft app and suppliers quote for that exact order, so the price you see is the one you pay.
How quickly is it delivered in Hyderabad?
Orders are delivered within 24 hours across Hyderabad. You confirm with a small booking fee and pay the supplier on delivery, with a full refund of the fee if you cancel before dispatch.
What does 710 actually mean?
IS 710 is the Indian Standard for boiling-water-proof plywood. A genuine 710 sheet survives 72 hours in boiling water without the plies separating. It is the grade for kitchens and bathrooms. MR, by contrast, is only moisture resistant and will delaminate if it is ever properly wet.
Plywood or MDF for kitchen cabinets?
Plywood, in a kitchen. MDF has a smoother face and takes paint better, but it swells irreversibly once water reaches it and holds screws poorly at an edge. BWP plywood for the carcass, with MDF or acrylic only on shutters that stay dry, is the combination that lasts.
How do I tell a real 710 sheet from a fake?
Check the ISI mark and the licence number, not just a '710' stamp, which anyone can print. Look at the cut edge for gaps, feel the weight, and ask for the warranty card in the brand's name. The reliable test is price: a 710 sheet sold near MR rates is not a 710 sheet.
Guides for buying century plywood
Get the lowest prices in Hyderabad in just 10 minutes!
Tell us the brand and quantity. Verified suppliers quote, you see the lowest, and most orders arrive within 24 hours.
Browse the full Clyft catalogue or see how quoting works.


