Lowest prices in Hyderabad in 10 minutes
Find the lowest prices in10 minutesHyderabad
Clyft

Quantity & Estimation

20 guides

How to work out bags, kilos, blocks, sand and aggregate for every part of a build.

Calculating AAC blocks needed for a house
Estimation

How Many AAC Blocks for a House? Calculation Method

Calculate AAC blocks for a whole house from wall lengths, heights and openings, by thickness, with adhesive and wastage, and a 1,000 sq ft worked example.

Coarse aggregate sizes for concrete
Estimation

Aggregate Sizes (10, 20, 40 mm) and Quantity per m³

Which coarse aggregate size to use for slabs, beams, footings and PCC, the IS 456 maximum-size rules, quantities per cubic metre by grade, and quality checks.

Calculating cement and sand for brickwork
Estimation

Cement and Sand for Brickwork: Calculation per m³

How to calculate bricks, cement and sand for 1 m³ of brickwork in 1:6 mortar, with the mortar volume worked out step by step and per sq ft figures for walls.

Estimating house construction cost from a plan
Estimation

How to Estimate House Construction Cost From Your Plan

A step-by-step method to estimate what your house will cost — built-up area, rates, materials, extras and contingency — with a worked example.

M-sand compared with P-sand for plastering
Estimation

M-Sand vs P-Sand: Which Sand for Concrete and Plaster?

M-sand for concrete and masonry, P-sand for plastering: particle sizes, why the grading differs, quality checks for dust and silt, and quantities by use.

Calculating reinforcement steel for an RCC beam
Estimation

Steel Calculation for a Beam: Worked Example

Calculate the steel in an RCC beam — bottom and top bars with anchorage, stirrup cutting length and count — with a 230 × 450 mm, 4 m span example.

Calculating reinforcement steel for an RCC column
Estimation

Steel Calculation for a Column: Worked Example

Calculate the steel in an RCC column: main bars with laps, tie cutting length and count, and total weight, with a 230 × 300 mm worked example.

Calculating reinforcement steel for an isolated footing
Estimation

Steel Calculation for a Footing: Worked Example

Calculate the steel mesh in an isolated footing — bars each way, lengths with cover and bends, weight — plus column starter bars, with a 1.5 m square example.

Calculating floor and wall tile quantity
Estimation

How Many Tiles Do I Need? Floor and Wall Tile Calculation

Calculate floor and wall tiles from room size, tile size and layout, add the right wastage, convert to boxes, and estimate adhesive, grout and skirting.

Bill of quantities for house construction
Estimation

BOQ for House Construction: What It Is and How to Use It

What a bill of quantities is, the item heads and units in a house BOQ, how it turns drawings into a budget, and how to use it to compare contractor quotes.

Built-up area compared with carpet area
Estimation

Built-Up Area vs Carpet Area vs Super Built-Up

Carpet, built-up and super built-up area explained with the RERA definition, typical ratios, and which one a construction cost per sq ft is based on.

Cement bags required for a 1000 square foot house
Estimation

How Many Cement Bags for a 1,000 Sq Ft House?

About 400 bags for 1,000 sq ft of built-up area. The thumb rule, a stage-by-stage split, how AAC walls change it, and how to order without waste.

Cement mortar mixing ratios for masonry and plaster
Estimation

Cement Mortar Ratio: 1:3, 1:4, 1:6 and Where Each Is Used

Which cement mortar ratio to use for brickwork, blockwork, plaster, pointing and waterproofing, with cement and sand per cubic metre for each mix.

Calculating concrete volume for structural members
Estimation

Concrete Volume Calculation: Slab, Beam, Column, Footing

Formulas and worked examples to calculate concrete volume for slabs, beams, columns, rectangular and sloped footings, and how to turn volume into cement bags.

Dry volume factor 1.54 for concrete
Estimation

Why Dry Volume of Concrete Is 1.54 Times Wet Volume

Where the 1.54 factor for concrete and 1.27 to 1.33 for mortar come from — voids, bulking and wastage — and how to use them consistently in estimates.

Calculating cement and sand for plastering
Estimation

Plaster Quantity Calculation: Cement and Sand per 100 Sq Ft

How to calculate cement and sand for wall and ceiling plaster, with worked examples for 12 mm internal, 20 mm external and 6 mm ceiling plaster.

Sand required for house construction
Estimation

How Much Sand for a House? Per Sq Ft and by Stage

Sand needed for house construction: the 1.8 cft per sq ft thumb rule, the split across concrete, masonry and plaster, tonnes vs cft, and how to cut waste.

Converting sand quantities between cft and tonnes
Estimation

Sand and Aggregate Units: CFT, Tonnes and Cubic Metres

Convert sand and aggregate between cft, cubic metres and tonnes, why loads quoted in tonnes and cft differ, bulking of damp sand, and lorry-load checks.

Converting square yards to square feet for Hyderabad plots
Estimation

Sq Yard to Sq Ft, Sq Metre and Guntas: Telangana Units

Convert square yards (gajalu) to sq ft, sq m, guntas and acres, with tables for common Hyderabad plot sizes and the units used in plans and sale deeds.

Calculating reinforcement steel for an RCC slab
Estimation

How to Calculate Steel for a Slab: Worked Example

Step-by-step steel calculation for an RCC slab: number of bars, lengths and weight for main and distribution steel, plus extras, with a room-sized example.

Quotes in about 10 minutes

Get the lowest prices in Hyderabad in just 10 minutes!

Tell us the brand and quantity. Verified suppliers quote, you see the lowest, and most orders arrive within 24 hours.

Get in 10mins!

Other topics

Get the Clyft app

The lowest quote for cement, steel and blocks in about 10 minutes.

Download on the App StoreGet it on Google Play
Three Clyft app screens: suppliers responding live on a map, the home screen, and the best price for a steel order